• Low profile, compact design

- measures only: 4.0" x 1.25" x 1.0"

Detailed Phase Shift with Frequency

 chart coming soon

40°/GHz PHASESHIFTERS

GENERAL SPECIFICATIONS

Electrical

RF Power: 100W average, 3kW peak

RF Connectors: SMA standard

Min. Adjustable Phase shift: 0 to 40°/GHz

Adjustable Group Delay min: 0 to 0.112 ns
Insertion Phase @ 1.0 GHz:

Applicable Mil-Specs

General:

Product Specific:

Mechanical

Size: 4.0" x 1.25" x .88"

Body: Aluminum

Connectors: Stainless Steel

Finish: Unique corrosion resistant 316

stainless steel epoxy coating IAW MIL-F-14072

40° Phaseshifters - Wide Band Models

Note: 0 - 40°/GHz Models achieve 40° minimum of phase shift @ 1GHz, actual phase shift varies linearly, corresponding to the Frequency unit is operating at.

Example: 

If operated @ 2GHz, the unit can achieve 80° phase shift min.,

If operated @ 4GHz operation, the unit can achieve 160° phase shift min., and so on.

60° Phaseshifters - Wide Band Models

Example:

If operated @ 2GHz, the unit can achieve 120° phase shift min.,

If operated @ 4GHz operation, the unit can achieve 240° phase shift min., and so on.

Use the "Phase Shift with Frequency" chart above for quick reference.

60° Phaseshifters - Special Band Models

Standard Model has mechanical

 adjustment with screwdriver shaft

 and locknut.

For Digital Counting Dial Option add "D" suffix to the Model Number
Example P/N: P1603 becomes: P1603D

For Direct Reading Option add

"DRE" suffix to the Model Number
Example P/N: P1603 becomes: P1603DRE

90°/GHz PHASESHIFTERS

GENERAL SPECIFICATIONS ( All Options )

Electrical

RF Power: 100W average, 3kW peak

RF Connectors: SMA/Type-N, standard

Min. Adjustable Phase shift: 0 to 90°/GHz

Adjustable Group Delay min: 0 to 0.254 ns
Insertion Phase @ 1.0 GHz:

Applicable Mil-Specs

General:

Product Specific:

Mechanical

Size: 7.0" x 2.0" x 1.0"

Body: Aluminum

Connectors: Stainless Steel

Finish: Unique corrosion resistant 316

stainless steel epoxy coating IAW MIL-F-14072

90°/GHz Phaseshifters -  Wide Band Models

Example:

If operated @ 2GHz, the unit can achieve 180° phase shift min.,

If operated @ 4GHz operation, the unit can achieve 360° phase shift min., and so on.

Use the "Phase Shift with Frequency" chart above for quick reference.

180°/GHz Phaseshifters -  Wide Band Models

 Motor Drive Option available for remote applications - click here for Outline Drawing

Note: 0 - 180°/GHz Models achieve 180° minimum of phase shift @ 1GHz, actual phase shift varies linearly, corresponding to the Frequency unit is operating at.

Example:

If operated @ 2GHz, the unit can achieve 360° phase shift min,

If operated @ 4GHz operation, the unit can achieve 720° phase shift min., and so on.

Use the "Phase Shift with Frequency" chart above for quick reference.

Standard Model has mechanical

 adjustment with screwdriver shaft

 and locknut.

For Digital Counting Dial Option add "D" suffix to the Model Number
Example P/N: P1102 becomes: P1102D

For Direct Reading Option add

"DRE" suffix to the Model Number
Example P/N: P1102 becomes: P1102DRE

360°/GHz PHASESHIFTERS

GENERAL SPECIFICATIONS ( All Options )

Electrical

RF Power: 100W average, 3kW peak

RF Connectors: SMA/Type-N, standard

Min. Adjustable Phase shift: 0 to 360°/GHz

Adjustable Group Delay min: 0 to 1.016 ns
Insertion Phase @ 1.0 GHz: 1375° (min setting)

Applicable Mil-Specs

General:

Product Specific:

Mechanical

Size: 24.0" x 3.0" x 1.2"

Body: Aluminum

Connectors: Stainless Steel

Finish:

Unique corrosion resistant 316

stainless steel epoxy coating IAW MIL-F-14072

360°/GHz Phaseshifters -  Wide Band Models

 Motor Drive Option available for remote applications - click here for Outline Drawing

Note: 0 - 360°/GHz Models achieve 360° minimum of phase shift @ 1GHz, actual phase shift varies linearly, corresponding to the Frequency unit is operating at.

Example:

If operated @ 2GHz, the unit can achieve 720° phase shift min.

Use the "Phase Shift with Frequency" chart above for quick reference.

• ATM's motor driven phase shifters utilize DC motors with integrated, long life gear reductions ideal for High Reliability applications.

• The unit will operate with a set DC voltage between 18-30VDC, commonly found in most systems or by a separate DC power supply. Motor speed will vary based on Voltage used. Maximum running current is 250mA & 600mA max starting.

• To prevent motor damage, Micro switches are used to stop the motor at the minimum and maximum travel positions

• Units are provided with 9 pin D Sub Male connectors allowing for control voltage, end point indication if desired and follower potentiometer. See connector pin-out.

• These devices are best controlled by an external Double-Pole/Double-Throw (DPDT), switch or ATM optional control module.

• Any one of ATM's Phase Shifters can be mounted to a motor drive.
   

  MOTOR SPEED / RESPONSE TIME
  ATM MODEL #	DEG/GHz	CASE LENGTH	* SPEED/TIME
  P140/P240	30°	3.75"	30 sec.
  P150/P250	60°	5.50"	14 sec.
  P160/P260	90°	7.0"	20 sec.
  P1210/P2210	180°	12.0"	40 sec.
  P1100/P2100	360°	24.0"	30 sec.

  * SPEED/TIME is the approximate time to drive the phaseshifter from min to max. for given model.
   

• For Motor Drive Option add -28 to any of the 30°,  60°,  90°,  180° or 360° phase shifters.                    Example: P1604 = P1604-28

The above photograph shows a P150 phase shifter mounted to a motor drive

Motor Drive Outline Drawings:  30°,  60°,  90°, 180°,  360°

Motor Characteristics:

1. Motor Control Voltage
Pins 2 and 7 of the nine pin D Sub male connector will have fixed DC voltage between 18-30 volts applied.  To increase pin 2 is + and pin 7 is -.  To reverse the direction 2 is - and 7 is +.  In both directions a stop is provided by means of Micro switches.

2. End Point Indicator *
The switch is also used to provide end point indication by means of pins 1 and 6 developing a voltage when the device has reached the maximum limit, (for 2+ and 7-). Pins will 3 and 8 will develop a voltage when a minimum limit is met. (for 2- and 7+). The developing voltage is equal to supply voltage used.

3. Follower Potentiometer **
A 10K Pot with an output proportional to the position of the motor drive mechanism is available at pins 4, 5, and 9.

An External Drive Module part number MCM-001 shown at right, is available for the motor drive as an optional accessory. It includes:
 
1.  Crisp tactile switches to control drive.
2.  Max/Min position indicator lights.
3.  Follower potentiometer terminals.
4.  Self-switching power supply with input of 120 VAC - 240VAC.*     
5.  6 Ft, 9 pin cable to interconnect the control box to the motor driven device.  

*If supplied power source is not used, an input of 18-30 VDC through the 9 pin connector may be substituted.